> Jacoby Custom Cues

Manufacturers

New products

Suppliers

Informations

List of products by manufacturer Jacoby Custom Cues

Jacoby Custom Cues, Inc. was formed in 1982 as Dave's Cue Service. David and his son, Shane, started doing repairs in the basement of their home. When they were ready for more challenges, they ventured on to tackle the task of creating their first cue. They put their talents and imaginations to work aided by other great cue makers and earned themselves membership in the American Cue Maker's Association. For those who value excellence, they created the finest handcrafted masterpieces, and Jacoby Custom Cues started to grow. Shane went in the Army in 1986 and then to college for industrial engineering. Dave's other son, Brandon, took over at this point. In 1992 they built a shop and moved out of the basement. It didn't take long for Jacoby Custom Cues to grow even more, to keep up with the demand of their fine cues they moved once again. 

Now, Jacoby Custom Cues is located in the downtown of Nekoosa, Wisconsin.  All of the work, from start to finish, takes place in Nekoosa, WI U.S.A. While Brandon runs and operates all of the shop and cue making duties, Dave can be found at most major pool tournaments and cue shows throughout the United States displaying cues and keeping a close eye on what the player's wants and needs are. Until 2013 Dave was the President of the American Cue makers Association, which works to promote the American made cue.  He held this position for six years and in 2013 stepped down. This move has allowed Dave to continue to enjoy local pool leagues, traveling to to see dealers around the country and enjoying a little extra time at his cabin.

http://www.jacobycustomcues.com/index.php

More
Showing 1 - 14 of 14 items
  • CAD$334.95

    Shaft Type: Edge HybridBrand: Single ring with Uni-locJoint: Uni-loc pilotedCollar: Single SilverJoint Diameter: .841"Length: 29"Taper: 19" pro taperTip Diameter: 11.75MM,  12.75MMTip: Tiger Everest (medium layered)

    CAD$334.95
    More
  • CAD$334.95

    Shaft Type: Edge HybridBrand: JacobyJoint: RadialCollar: BlackJoint Diameter: .847"Length: 29"Taper: 19" pro taperTip Diameter: 11.75MM,  12.75MMTip: Tiger Everest (medium layered)

    CAD$334.95
    More
  • CAD$334.95

    Shaft Type: Edge HybridBrand: Meucci Joint: 5/16-18 Flat FacedCollar: .480" BlackJoint Diameter: .820"Length: 29"Taper: 19" pro taperTip Diameter: 11.75MM, 12.75MMTip: Tiger Everest (medium layered)

    CAD$334.95
    More
  • CAD$334.95

    Shaft Type: Edge HybridBrand: FalconJoint: 5/16-14 pilotedCollar: Single SilverJoint Diameter: .845"Length: 29"Taper: 19" pro taperTip Diameter: 11.75MM, 12.75MMTip: Tiger Everest (medium layered)

    CAD$334.95
    More
  • CAD$334.95

    Shaft Type: Edge HybridBrand: Jacoby Joint: 5/16-14 pilotedCollar: .480" BlackJoint Diameter: .847"Length: 29"Taper: 19" pro taperTip Diameter: 11.75MM, or 12.75MMTip: Tiger Everest (medium layered)

    CAD$334.95
    More
  • CAD$259.95

    Jacoby natural Curly maple extension jump cue with finger groove. The jump handle with finger groove at the joint for a 'darting' technique and a bell at the end for a 'stroking' technique. It has a 6" extension that is removable. The shaft has a stiff taper with a 13mm phenolic tip and a 3/4" brass ferrule.

    CAD$259.95
    More
  • CAD$249.95

    Jacoby natural curly maple handle with finger groove at the joint for a 'darting' technique and a bell at the end for a 'stroking' technique. The shaft has a stiff taper with a 13mm phenolic tip and a 3/4" brass ferrule. The total length of the cue assembled is 41", consisting of a 29" shaft and 12" butt. The length of the butt including 10 thread pin and...

    CAD$249.95
    More
  • CAD$259.95

    Jacoby medium stained Curly maple extension jump cue with finger groove. The jump handle with finger groove at the joint for a 'darting' technique and a bell at the end for a 'stroking' technique. It has a 6" extension that is removable. The shaft has a stiff taper with a 13mm phenolic tip and a 3/4" brass ferrule.

    CAD$259.95
    More
  • CAD$249.95

    Jacoby medium stained curly maple handle with finger groove at the joint for a 'darting' technique and a bell at the end for a 'stroking' technique. The shaft has a stiff taper with a 13mm phenolic tip and a 3/4" brass ferrule. The total length of the cue assembled is 41", consisting of a 29" shaft and 12" butt. The length of the butt including 10 thread...

    CAD$249.95
    More
  • CAD$1,449.95

    Jacoby HB5 custom pool cue. This cue has a Olivewood forearm with 4 long Ebony points and 4 short floating Ebony points. The long points have Turquoise diamond shape inlays at the base along with 4 brass accent dots.

    CAD$1,449.95
    More
  • CAD$879.95

    Jacoby HB1 custom pool cue. This cue has a beautiful natural Birdseye Maple forearm and butt sleeve. The wrap section is made from a beautiful piece of Olivewood. Completing cue is custom ring work, signature with date, and The Edge Hybrid shaft with joint protectors.

    CAD$879.95
    More
  • CAD$1,149.95

    Jacoby 0515-21 custom pool cue. This cue has a natural stain Birdseye Maple forearm with 4 Cocobolo points outlined with black, red, orange, and maple veneers.

    CAD$1,149.95
    More
  • CAD$2,189.95

    Jacoby 0215-54 custom pool cue. This cue has a beautiful Curly Maple forearm with 3 Ebony points outlined with green, Maple, and black veneers. Between each forearm point there are Ebony and Malachite floating inlay design.

    CAD$2,189.95
    More
  • CAD$789.95

    Jacoby 0215-07 custom pool cue. This cue has a natural Birdseye Maple forearm with 4 Zircote points outlined in black. The wrap section and butt sleeve is a medium stained Curly Maple. Completing cue is custom double white joint rings and striped Ebony joint collar. Cue is signed and dated and comes with hard maple shaft and joint protectors

    CAD$789.95
    More
Showing 1 - 14 of 14 items